Console Replacement - Luxury

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.




1. Remove the negative battery cable.
2. Remove the console trim plate.




3. Remove the console to floor bolts.
4. Remove one of the front bucket seats.




5. Disconnect the IP harness (1) and the cross body harness (5) connectors from the console.
6. Remove the console by sliding rearward and lifting out of the vehicle.

INSTALLATION PROCEDURE



1. Install the console to the vehicle by sliding forward and onto the bracket.
2. Connect the IP harness (1) and the cross body (5) harness in the console.
3. Install the front bucket seat.

NOTE: Refer to Fastener Notice in Cautions and Notices.




4. Install the console to floor bolts in order of 3, 4, 1, 2.

Tighten
Tighten the bolts to 6 N.m (53 lb in).




5. Install the console trim plate.
6. Install the negative battery cable.