Seats: Service and Repair

Rear Seat Replacement (Crew Cab)

Removal Procedure






1. Remove the front and the rear leg trim covers.
2. Remove the seat retaining bolts (2).






3. Remove the seat from the vehicle.

Installation Procedure






1. Install the seat into the vehicle.






Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the seat retaining bolts.

Tighten
Tighten the bolts to 55 Nm (41 lb ft).

3. Install the front and the rear leg trim covers.