Electronic Column Lock Module - Disassemble

DISASSEMBLY PROCEDURE





1. Remove the upper tilt head components.
2. Remove the key alarm connector (1) from the lock module assembly (2).
3. Remove the 2 tapping screws from the ignition and key alarm switch assembly (3).





4. Remove the 3 pan head tapping screws (1) from the lock module assembly (2).
5. Remove the lock module assembly (2) and the lock bolt assembly (4) from the steering column tilt head assembly (5).

Important: The lock bolt assembly (4) is under slight spring tension from the lock bolt spring (3). Hold the lock bolt (4) in place while removing the lock module assembly (2).

6. Remove the lock bolt spring (3) from the lock bolt assembly (4).