Steering Column Seal - C 3500 HD Only

REMOVAL PROCEDURE





1. Remove the steering column.





2. Push the locking ring tabs inward one at a time until the seal (1) separates from the dash panel (2).
3. Note the position of the locating tab directly at the bottom of the locking ring and the dash panel (2) opening.


INSTALLATION PROCEDURE





1. Align the locating tab groove on the seal (1) directly at the bottom of the dash panel (2) opening.
The sheet metals fits into the groove.
2. Force the seal (1) upward and inward until the seal snaps into place.





3. Install the steering column.