21. Retainer and Ball Assembly Leak Check

Installation Procedure

^ Tools Required
- J 29714-A Servo Cover Compressor





1. Install the 2-4 servo into the case.





2. Use the J 29714-A in order to compress the servo cover.
3. Install the servo cover retaining ring.





4. Pour solvent into the accumulator bore until the channel is filled. Watch for leaks in the case channel.

Important: It is normal to see leakage from the small hole next to the larger oval hole.

5. If leakage from the oval shaped hole is observed, replace the third accumulator retainer and ball assembly.