Crankshaft Journal Diameter and Limits

Crankshaft Journal (Main)	OD (White) (1-4)	2.9524 - 2.9527 Inch (in)
	OD (White) (5)	2.9522 - 2.9525 Inch (in)
	OD (Orange Or Red) (1-4)	2.9520 - 2.9524 Inch (in)
	OD (Orange Or Red) (5)	2.9518 - 2.9522 Inch (in)
	OD (Blue) (1-4)	2.9517 - 2.9520 Inch (in)
	OD (Blue) (5)	2.9515 - 2.9518 Inch (in)
	Taper	0.0033 Inch (in) Mqaximum
	Out-Of-Round	0.0033 Inch (in) Maximum
	Bearing Clearance (1-4)	0.0018 - 0.0033 Inch (in)
	Bearing Clearance (5)	0.0022 - 0.0037 Inch (in)
Crankshaft Journal (Rod)	OD (Yellow)	2.4000 - 2.4010 Inch (in)
	OD (Green)	2.3990 - 2.4000 Inch (in)
	Taper	0.0018 - 0.0033 Inch (in) Maximum
	Out-Of-Round	0.0018 - 0.0033 Inch (in) Maximum
	Bearing Clearance	0.0014 - 0.0035 Inch (in)
	Side Clearance	0.0020 - 0.0120 Inch (in)
	End Play	0.0039 - 0.0010 Inch (in)
	Crankshaft Bearing (Main).	Select Fit
	White (1)	STD inch Case STD inch Cap ,STD inch Case, STD inch Cap
	White (2)	0.013 mm U.S. inch Case STD inch Cap, 0.0005 inch U.S. inch Case, STD inch Cap
	White (3)	0.026 mm U.S. inch Case, STD inch Cap 0.0010 inch U.S. inch Case, STD inch Cap
	Orange Or Red (1)	STD inch Case, 0.013 mm U.S. inch Cap STD inch Case, 0.0005 inch U.S. inch Cap
	Orange Or Red (2)	0.013 mm U.S. inch Case, 0.013 mm U.S. inch Cap 0.0005 inch U.S. inch Case, 0.0005 inch U.S. inch Cap
	Blue (1)	STD inch Case, 0.026 mm U.S. inch Cap STD inch Case, 0.0010 inch U.S. inch Cap
	Blue (2)	0.013 mm U.S. inch Case, 0.026 mm U.S. inch Cap 0.0005 inch U.S. inch Case, 0.0010 inch U.S. inch Cap
	Blue (3)	0.026 mm U.S. inch Case, 0.026 mm U.S. inch Cap 0.0010 inch U.S. inch Case, 0.0010 inch U.S. inch Cap
Crankshaft Bearing (Rod)-Select Fit Refer To Crankshaft And Bearings Installation (L65).	Yellow	STD inch Rod, STD inch Cap STD inch Rod, STD inch Cap
	Green	STD inch Rod, 0.026 mm U.S. inch Cap STD inch Rod, 0.0010 inch U.S. inch Cap
Crankshaft Bearing Cap Bolts	(Inner Bolts-12 mm ) First Pass	55 Foot Pound-Force (ft.lb)
	(Inner Bolts-12 mm ) Second Pass	55 Foot Pound-Force (ft.lb)
	(Inner Bolts-12 mm ) Final Pass	90 deg.
	(Outer Bolts-12 mm ) First Pass	148 Foot Pound-Force (ft.lb)
	(Outer Bolts-1 2 mm ) Second Pass	148 Foot Pound-Force (ft.lb)
	(Outer Bolts-1 2 mm ) Final Pass	90 deg.
	(Outer Bolts-1 0 mm ) Single Pass	30 Foot Pound-Force (ft.lb)