Steering Shaft, Lower Bearing & Jacket - Assemble

ASSEMBLY PROCEDURE





1. Attach the steering column support assembly (2) to the steering column jacket assembly (1) with 4 TORX head screws (1).
- Tighten the 4 TORX screws to 17 Nm (13 ft. lbs.).

Notice: Refer to Fastener Notice in Service Precautions.





2. Install the steering shaft (1).
3. Install the adapter and bearing assembly (2).
4. Install the steering column seal (3).
5. Install the turn signal.
6. Install the lock module assembly.