Tilt Spring - Assemble

ASSEMBLY PROCEDURE





1. Lubricate the spring guide with synthetic grease.
2. Install the spring guide (1) to the tilt spring (2).





3. Install the tilt spring (1).
3.1. Install the tilt spring (1) to the post on the steering column support assembly (2).
3.2. Secure the tilt spring (1) with locking pliers.

Caution: The tilt spring and the spring guide are under pressure and could become a projectile. During the disassembly end assembly procedures, secure the tilt spring with hacking pliers. Exercise caution when removing or installing the tilt spring and the spring guide, as bodily injury may result.

4. Install the upper and lower shrouds.