56. Fourth Clutch Assembly Assemble

^ Tools Required
- J 38731-1 Fourth Clutch Piston and Housing Seal Protector
- J 38731-2 Fourth Clutch Piston and Housing Seal Protector
- J 38731-3 Fourth Clutch Piston and Housing Seal Spacer
- J 38882 Fourth Clutch Spring and Retainer Assembly Adapter
- J 23327 Clutch Spring Compressor





1. Install the fourth clutch piston inner seal (527) onto the fourth clutch piston (528).





2. Install the fourth clutch piston outer seal (531) into the fourth clutch housing (529). The seal lip should face the bottom of the piston when the piston is installed.





3. Place the J 38731-1 onto the fourth clutch housing (529) through the small end.
4. Place the J 38731-2 onto the large end of the fourth clutch piston (528).





5. Place the J 38731-2 and the fourth clutch piston (528) onto the J 38731-3.





6. Gently push down on the fourth clutch housing (529) until the fourth clutch piston (528) is through the fourth clutch housing (529), exposing the retainer ring groove.
7. Remove all tools.





8. Place the fourth clutch spring (532) and the fourth clutch spring retainer ring (533) onto the fourth clutch piston (528).
9. Compress the fourth clutch spring (532) using the J 38882, the J 23327 and the J 38731-3.
10. Install the fourth clutch spring retainer ring (533).
11. Remove the tools.





12. Install the fourth clutch plates (525, 526) into the fourth clutch housing (529):
^ Alternate the clutch plates, starting with the steel clutch plate (526) (4 steel and 4 composite)
^ Locate the steel plate index notch opposite the fourth clutch bolt hole
13. Install the fourth clutch backing plate (524). Locate the notched tab in the same direction as the steel plate index notches.
14. Install the fourth clutch backing plate retainer ring (523).