Washer Solvent Container Replacement

REMOVAL PROCEDURE
1. Remove the auxiliary battery and battery tray, if equipped.
2. Remove the two bolts.
3. Disconnect the hose(s) from the washer pump(s).
4. Disconnect the electrical connector(s) from the washer pump(s).
5. Remove the washer solvent container from the vehicle.

INSTALLATION PROCEDURE
1. Install the washer solvent container on the vehicle.
2. Connect the electrical connector(s) to the washer pump(s).
3. Connect the hose(s) to the washer pump(s).

NOTE: Refer to Fastener Notice in Cautions and Notices.

4. Install the two bolts.

Tighten
Tighten the two bolts to 6 N.m (53 lb in).

5. Install the auxiliary battery and battery tray, if equipped.