Rear Seat Audio (RSA)

The Rear Seat Audio Controller feature allows the rear seat passengers to listen to a different music source than the front seat passengers including the cassette tape and the remote Compact Disc (CD) players. For example, the rear seat passengers may listen to the cassette or CD through headphones while the driver listens to the radio through the front speakers. The rear seat passengers have control of the volume for each headphone. Be aware that the primary radio controls always override the rear seat audio controls.

Seek (SEEK)
The sound will mute while seeking. The SEEK button is inactive when the front radio is also using the SEEK feature. Use the following procedure in order to seek:
1. Press the up arrow in order to tune to the next higher station (with enough strength) and stay there.
2. Press the down arrow to tune to the next lower station (with enough strength) and stay there.

Use the following procedure in order to seek selections on a cassette tape:
1. Press the up arrow in order to hear the next selection on the tape.
2. Press the down arrow in order to go back to the previous selection.

Use the following procedure in order to seek selections on a compact disc:
1. Press the up arrow in order to immediately listen to the next track instead of waiting until the current track is finished.
2. Hold the up arrow button or press it more than once in order to advance to further tracks.
3. Press the down arrow in order to go to the start of the current track if more than 8 seconds have played.

Power (PWR)
Press this button in order to turn the rear seat audio system ON or OFF. The rear speakers mute when the power is turned ON. You may operate the rear seat audio functions even when the primary radio power is off.

Band Switching (AM/FM)
Press the AM/FM button in order to switch between AM, FM1 and FM2. The selection appears on the display. If the front passengers are already listening to AM-FM, the rear seat audio controller will not switch between the bands and cannot change the frequency.

Source Switching (TAPE CD)
Use the following procedure in order to switch between listening sources:
1. Press the TAPE CD button in order to activate the source switching feature. There must be a cassette tape and/or compact disc in the player.
2. Press the TAPE CD button in order to switch between the cassette tape and the compact disc functions.

Preset Program (P.SET PROG)
The front passenger must be listening to something different for the P.SET PROG to operate. Press the P.SET PROG in order to use the following functions:
^ To seek through your preset radio stations that are set on your primary radio push-buttons.
^ To go to the other side of the cassette tape while the cassette is playing.
^ To change discs when a compact disc is playing. This button will no operate if used with a single remote compact disc player.

Volume (VOL)
The upper VOL knob, the upper headphone jack, and the lower VOL knob controls the lower headphone jack.

Use the following procedure in order to operate the volume control:
1. Press lightly on the VOL knob in order to extend the knob.
2. Turn the knob clockwise in order to increase the volume.
3. Turn the knob counterclockwise in order to decrease the volume.
4. Push the knob in when you are not using the volume control.