Blower Motor Replacement - Auxiliary Air Conditioning

REMOVAL PROCEDURE




1. Remove the left body side trim panel.
2. Remove the cooling tube from the case and the motor.
3. Disconnect the electrical connectors.
4. Remove the screws that retain the blower motor to the case.
5. Remove the blower motor assembly from the case.

INSTALLATION PROCEDURE




1. Install the blower motor assembly to the case.

NOTE: Refer to Fastener Notice in Caution and Notices.

2. Install the screws that retain the blower motor to the case.

Tighten
Tighten the screws to 4 N.m (35 lb in).

3. Connect the electrical connectors.
4. Install the cooling tube to the motor and to the case.
5. Install the left body side rear trim panel.