Instrument Panel (IP) - Air Vent Replacement - Outlet

IP Air Outlet Vent Replacement

Removal Procedure

1. Remove the right side knee bolster. Refer toKnee Bolster Replacement - Right (Knee Bolster Replacement - Right) .




2. Remove the screw that retains the air outlet vent to the instrument panel.




3. Lift upward on the instrument panel assist handle.
4. Remove the air outlet vent from the instrument panel.



Installation Procedure





1. Lift upward on the instrument panel assist handle.




2. Install the air outlet vent to the instrument panel.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the screw that retains the air outlet vent to the instrument panel.

Tighten the screw that retains the air outlet vent to the instrument pane to 2 N.m (18 lb in).

4. Install the right side knee bolster. Refer toKnee Bolster Replacement - Right (Knee Bolster Replacement - Right) .