Instrument Panel, Gauges and Warning Indicators: Service and Repair

CONSOLE REPLACEMENT

REMOVAL PROCEDURE
1. Position the front seats rearward.




2. Reach under the front seats to access the lower console screws.
3. Remove the console screws.
4. Lift the rear of the center floor console.




5. Disconnect the electrical connector to the auxiliary power outlet.
6. Slide the center floor console rearward to access the upper console screws.




7. Remove the bolts which hold the console to the center stack.
8. Remove the floor console.

INSTALLATION PROCEDURE




1. Position the console with the mounting bracket.
2. Install the console screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2.5 N.m (22 lb in).




3. Connect the electrical connector to the auxiliary power outlet.
4. Reposition the center console.




5. Reach under the front seats to access the lower console screws.
6. Install the center console screws.

Tighten the screws to 2.5 N.m (22 lb in).
7. Position the front seat forward to the original position.