Seat Replacement - Rear (Extended Cab W/4th Door)

SEAT REPLACEMENT - REAR (EXTENDED CAB W/4TH DOOR)

REMOVAL PROCEDURE




1. Remove the front and the rear leg trim covers.
2. Remove the seat retaining bolts (2).




3. Remove the seat from the vehicle.

INSTALLATION PROCEDURE




1. Install the seat into the vehicle.




2. Install the seat retaining bolts (2).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the seat retaining bolts to 55 N.m (41 lb ft).

3. Install the front and the rear leg trim covers.