Actuator: Service and Repair

Front Drive Axle Actuator Replacement

Removal Procedure

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the engine protection shield. Refer to Engine Protection Shield Replacement .
3. Disconnect the electrical connector from the actuator assembly.




4. Remove the actuator assembly bolts.
5. Remove the actuator assembly.



Installation Procedure

1. Install the actuator assembly.





Notice: Refer to Fastener Notice .

2. Install the actuator assembly bolts.

Tighten the bolts to 6 N.m (53 lb in).

3. Connect the electrical connector to the actuator assembly.
4. Install the engine protection shield. Refer to Engine Protection Shield Replacement .
5. Lower the vehicle.