VIN 6

Valve Rocker Arm Cover Installation - Upper Right Side




1. Install NEW valve rocker arm cover grommets and use NEW valve rocker arm cover bolts if they are serviced with the grommet.

Note: The gasket may be reused if it is not torn, cracked, stretched, or swollen.

2. Install the upper valve rocker arm cover.





Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the upper valve rocker arm cover bolts. Tighten the upper valve rocker arm cover bolts in the proper sequence to 8 Nm (71 lb in).