Operation CHARM: Car repair manuals for everyone.

87. Piston Oil Nozzle Installation




Piston Oil Nozzle Installation




1. Install the piston oil cooling nozzle.





Caution: The piston oil cooling nozzle must be aligned to direct oil towards the oil inlet hole on the bottom of the piston. Improper alignment of the piston oil cooling nozzle will allow insufficient oil lubrication to the piston and cause severe engine damage.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the piston oil cooling nozzle bolt and tighten to 21 Nm (15 lb ft).