Operation CHARM: Car repair manuals for everyone.

Technician Safety Information




Seat Belt Service Precautions

Important: If the vehicle has been in a collision, refer to Repairs and Inspections Required After a Collision (Seat Belts) for additional information.


* Do not bleach or dye the seat belt webbing. Clean the seat belt webbing only with a mild soap and water solution and a soft brush or cloth.
* Keep sharp edges and damaging objects away from the seat belts. Avoid bending or damaging any part of the seat belt buckle or latch plate.
* Replace any seat belts which are cut or damaged in any way.
* Use only correct seat belt anchor bolts and screws.

- Tighten the bolts and the screws to the correct torque value. Refer to Fastener Tightening Specifications (Specifications).
- When installing the seat belt anchor bolts, start the bolt by hand in order to ensure that the bolt is threaded straight.

* Some seat belts and retractors must be serviced as a set with service replacement parts only. Do not attempt to make repairs to the individual components which are only serviced as a set.
* Verify that the replacement part number is correct for the vehicle at that seating position. Do not substitute a seat belt from a different seating position.