Operation CHARM: Car repair manuals for everyone.
Home >> Chevy Truck >> 2010 >> Express 3500 V8-6.6L DSL Turbo >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 4L60-E/4L65-E/4L70-E - Automatic Transmission >> 4L60-E - Automatic Transmission >> 63. Oil Pump Body Assemble

63. Oil Pump Body Assemble




Oil Pump Body Assemble

Special Tools
* J 25016 - Pump Seal and Speedometer Gear Installer
* J 36850 - Transjel Lubricant




1. Using the J 25016 - gear installer (1), install the oil seal assembly (243).




2. Install the fluid seal retainer (244).




3. Install an O-ring seal (202) and oil seal ring (201) into the groove on the back side of the pump slide (203).
4. Use J 36850 - transjel lubricant, or an equivalent, to retain the seal and the ring on the slide.
5. Install the pivot pin spring (204) into the pump body pocket.
6. Install the seal support (208) and the pump slide seal (209) into the pump slide (203). Retain with J 36850 - transjel lubricant or equivalent.
7. Install the pump slide (203).
The oil seal ring must face downward into the pump pocket.
8. Install the pivot pin (205), index the slide notch with the pivot pin.




9. Install the fluid pump slide outer spring (245).




10. Install the rotor guide (211) and the bottom pump vane ring (210) into the rotor (212) and retain with J 36850 - transjel lubricant or an equivalent.
11. Install the rotor (212) with the rotor guide (211) toward the pump pocket.
12. Install the pump vanes (213). Ensure the vanes are flush with the oil pump body surface.
13. Install the top pump vane ring (210).

pro multis · About Operation CHARM