Operation CHARM: Car repair manuals for everyone.

Vent Hose Replacement




Vent Hose Replacement

Removal Procedure

Important: Make note of the routing in order to aid in reassembly.


1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).




2. For 15 series vehicles, remove the vent hose from the clip attached to the frame.
3. Remove the vent hose from the axle.




4. For 25/35 series vehicles, remove the vent hose from the clip attached to the frame.
5. Remove the vent hose from the axle.

Installation Procedure

Important: When installing the vehicle hose, note the following:


* Route the same way as when removed.

* Ensure that the hose is free of kinks and is routed clear of sharp objects.

* Ensure that the vent is not plugged.





1. For 15 series vehicles, install the vent hose to the axle.
2. Install the vent hose to the clip attached to the frame.




3. For 25/35 series vehicles, install the vent hose to the axle.
4. Install the vent hose to the clip attached to the frame.
5. Lower the vehicle.