7. Torque Converter Inspection

Torque Converter Inspection





Important: Replace the torque converter if it does not meet specifications.


1. Measure the OD of torque converter hub (1) at dimension A, the bushing wear area.

Dimension A must equal or exceed 58.250 mm (2.293 in).




2. Measure the distance between the flats of the torque converter hub at dimension A.

Dimension A must equal or exceed 51.816 mm (2.040 in).




3. Measure the OD of the torque converter cover pilot at dimension A.

Dimension A must equal or exceed 43.080 mm (1.696 in).