Vent Hose Replacement

Vent Hose Replacement

Removal Procedure

Note: Notice the routing of the vent hose to ensure the correct positioning for reassembly.

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.




2. Remove the vent hose from the rear axle vent hose connector.




3. Remove the vent hose from the retaining clip on the frame.

Installation Procedure




1. Install the vent hose to the clip on the frame.




2. Install the vent hose on the rear axle vent hose connector.
3. Remove the support and lower the vehicle.