Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 1992 >> Imperial V6-231 3.8L VIN L FI >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Coolant Temperature Sensor/Switch (For Computer) >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Coolant Temperature Sensor/Switch (For Computer): Service and Repair

Ignition Coil And Coolant Temperature Sensor Location:






Removal

1. Drain cooling system until coolant level is below sensor.

2. Disconnect coil pack electrical connector to sensor.

3. Remove coil mounting screws.

4. Rotate coil away from coolant temperature sensor.

5. Disconnect electrical connector from coolant temperature sensor.

6. Remove sensor from engine.


Installation

1. Tighten the coolant sensor to 7 Nm (60 in lbs) torque.

2. Connect electrical connector to sensor.

3. Fill cooling system. Refer to Group 7, Cooling System.

4. Install coil. Tighten coil mounting screws to 12 N-m (105 in lbs) torque.

5. Connect electrical connector to coil.
pro multis · About Operation CHARM