| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Tune-Up | 1.4 | 0.0 | B | Includes: R&R Trans Pan, Service Filter And Make All Necessary Adjustments. |
| Diagnose/Test |
| 4 Speed (42LE/A606) |
| Electronic Trans, Diagnosis | 1.8 | 0.0 | A | Includes: Time To Hook-Up And Disconnect Test Equipment. Checking System For Fault Codes, Road Test And Hydraulic Pressure Test As Required. |
| Replace |
| 3 Speed |
| Complete Assembly Without Transfer of Parts | 4.0 | 2.7 | B | |
| Note |
| With ABS, Add | 0.4 | 0.2 | B | |
| To Renew Driveplate, Add | 0.4 | 0.2 | B | |
| To Check Cooler System Flow, Add | 0.7 | 0.4 | B | |
| To Reverse Flush Cooler System, Add | 0.8 | 0.5 | B | |
| To Replace Torque Converter, Add | 0.2 | 0.2 | B | |
| To Replace Crankshaft Rear Main Oil Seal, Add | 0.5 | 0.3 | B | |
| Complete Assembly With Transfer of Parts | 4.6 | 3.1 | B | Includes: R&I Transaxle. |
| Note |
| With ABS, Add | 0.4 | 0.2 | B | |
| To Renew Driveplate, Add | 0.4 | 0.2 | B | |
| To Check Cooler System Flow, Add | 0.7 | 0.4 | B | |
| To Reverse Flush Cooler System, Add | 0.8 | 0.5 | B | |
| To Replace Torque Converter, Add | 0.2 | 0.2 | B | |
| To Replace Crankshaft Rear Main Oil Seal, Add | 0.5 | 0.3 | B | |
| 4 Speed (42LE/A606) |
| Complete Assembly Without Transfer of Parts | 5.1 | 3.8 | B | |
| Note |
| To Renew Driveplate, Add | 0.4 | 0.2 | B | |
| To Check Cooler System Flow, Add | 0.7 | 0.4 | B | |
| To Reverse Flush Cooler System, Add | 0.8 | 0.5 | B | |
| To Replace Torque Converter, Add | 0.2 | 0.2 | B | |
| To Replace Crankshaft Rear Main Oil Seal, Add | 0.5 | 0.3 | B | |
| Complete Assembly With Transfer of Parts | 5.7 | 3.9 | B | Includes: R&I Transaxle. |
| Note |
| To Renew Driveplate, Add | 0.4 | 0.2 | B | |
| To Check Cooler System Flow, Add | 0.7 | 0.4 | B | |
| To Reverse Flush Cooler System, Add | 0.8 | 0.5 | B | |
| To Replace Torque Converter, Add | 0.2 | 0.2 | B | |
| To Replace Crankshaft Rear Main Oil Seal, Add | 0.5 | 0.3 | B | |
| Overhaul/Rebuild |
| 4 Speed (42LE/A606) | 13.1 | 9.4 | A | Includes: R&I Transaxle. |
| Note |
| To Renew Driveplate, Add | 0.4 | 0.2 | A | |
| To Check Cooler System Flow, Add | 0.7 | 0.4 | A | |
| To Reverse Flush Cooler System, Add | 0.8 | 0.5 | A | |
| To Replace Torque Converter, Add | 0.2 | 0.2 | A | |
| To Replace Crankshaft Rear Main Oil Seal, Add | 0.5 | 0.3 | A | |
| 3 Speed | 9.9 | 6.9 | A | Includes: R&I Transaxle. |
| Note |
| With A.B.S., Add | 0.4 | 0.2 | A | |
| To Renew Driveplate, Add | 0.4 | 0.2 | A | |
| To Check Cooler System Flow, Add | 0.7 | 0.4 | A | |
| To Reverse Flush Cooler System, Add | 0.8 | 0.5 | A | |
| To Replace Torque Converter, Add | 0.2 | 0.2 | A | |
| To Replace Crankshaft Rear Main Oil Seal, Add | 0.5 | 0.3 | A | |