Front Window -- Right

When the DRIVER selects window DOWN operation power is supplied on the F21 circuit through the switch to circuit Q26.

Circuit Q26 connects from the drivers door switch to the right front door switch. Power is passed through this switch to circuit Q22. The Q22 circuit then goes to the right front window motor.

Ground for the window motor is supplied on the Q12 circuit hack to the right door switch. Circuity internal to the switch then passes the ground to circuit Q16. Circuit Q16 connects from the right front door switch to the master switch. A bus bar, internal to the switch, connects the Q16 circuit to the Z1 circuit. The Z1 circuit is terminated at the instrument panel left side cowl.

For window UP operation the circuits are reversed. Circuits Q16 and Q12 are the feeds, and circuits Q22 and Q26 are the grounds.

If the switch is being operated from the PASSENGER'S front door, and the operator is requesting window DOWN operation, power is supplied on the Q1 circuit from the driver's master switch through the switch to the Q22 circuit.

Ground for the motor is supplied on the Q12 circuit through the switch and back to the master switch on circuit Q16. A bus bar, internal to the switch, connects the Q16 circuit to the Z1 circuit. The Z1 circuit is terminated at the instrument panel left side cowl.

For window UP operation, the circuits are reversed. Circuit Q12 is the power and circuit Q22 is the ground.