Two (2) Button Transmitters

TWO (2) BUTTON TRANSMITTERS
To program an RKE transmitter, use the DRB and select "Body Computer", then "Miscellaneous", then "Program RKE". Push any button on the transmitter. The locks will lock or unlock to indicate that the BCM has received a useable code and will store it. If another transmitter is to be programmed, re-enter and repeat the steps.

The BCM is capable of storing up to four transmitter codes. If an attempt to program a fifth transmitter is received, the DRB will inform that "All Locations Are In Use" and ask if you want to cancel them. If you answer yes, it will inform you that it is in programming mode. Press any button on a transmitter that you want to keep in memory. If you exit after answering yes, it will retain only the first transmitter code and cancel all others.