Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 1996 >> Concorde V6-201 3.3L >> Repair and Diagnosis >> Heating and Air Conditioning >> Condenser HVAC >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Condenser HVAC: Service and Repair

CAUTION: The cooling module assembly must be removed to service the condenser. Removing the condenser using other methods may cause damage to the condenser and/or radiator assembly.

REMOVAL
1. Disconnect negative battery cable.

Sight Shield Removal:




2. Remove sight shield.
3. Remove right and left headlamp modules.
4. Drain engine cooling system.
5. Remove refrigerant from A/C system using a recovery machine.
6. Disconnect and cap A/C lines at condenser.

Radiator Crossmember:




7. Remove upper radiator crossmember.
8. Remove hose clamps and hoses from radiator.
9. Disconnect automatic transaxle cooler line hoses from cooler. Temporarily plug cooler lines after removal.
10. Disconnect fan wiring connector from RFI Module.
11. Remove upper radiator mounting screws to body. Access to mounting screws can be obtained through hole in headlamp module bracket.
12. Lift entire cooling module from vehicle.

CAUTION: Avoid bending or breaking condenser inlet tube, and do not damage radiator cooling fins or coolant tubes during module removal.

A/C Condenser:




13. Remove air conditioning condenser attaching screws located at front of radiator to separate radiator from condenser.

INSTALLATION
For installation, reverse the above procedures. Charge system and check for leaks.
pro multis · About Operation CHARM