Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 1996 >> Concorde V6-201 3.3L >> Repair and Diagnosis >> Heating and Air Conditioning >> Evaporator Temperature Sensor / Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Evaporator Temperature Sensor / Switch: Service and Repair

REMOVAL
1. Disconnect battery.
2. Remove right under panel silencer.
3. Disconnect wiring connector for evaporator probe.

Evaporator Probe:




4. At center of heater housing, locate evaporator probe access plate. Using a flat blade pry tool, pull back on the locking tab. Twist the access plate counter clockwise one-quarter turn and remove plate.
5. Pull probe out of evaporator core. This plate must be pushed inside the A/C unit and orientated in such a way that the plate can be removed.

INSTALLATION

Evaporator Probe:




1. Install new probe into the evaporator. The new probe must not go into the same hole (in the evaporator core) that the old probe was removed. The evaporator is manufactured with three holes for probe insertion. Insert the probe in the uppermost hole.
2. Install evaporator probe access panel.
3. Connect probe wiring harness.
4. Reconnect battery.
pro multis · About Operation CHARM