Front Door Window Glass: Service and Repair

Front Door Glass:

FRONT DOOR GLASS REMOVAL
1. Remove door trim panel and upper trim retainer channel.
2. Connect power window switch or install crank and lower window to 50 mm (2 in.) from bottom of travel.
3. Loosen screws holding regulator roller channel to glass.
4. Slide roller channel rearward to allow screw heads to pass through key hole slots in channel.
5. Separate glass from roller channel.
6. Raise glass upward and out of the opening at top of door.

INSTALLATION
1. Lower glass into opening at top of door.
2. Place glass in position against roller channel.
3. Insert screw heads into key hole slots in roller channel and slide channel forward to locked position.
4. Tighten screws to hold regulator roller channel to glass.
5. Install upper trim retainer channel and install door trim panel.