Leak Detection Pump: Service and Repair

Fig 5 EVAP Canister And LDP:

REMOVAL
1. Disconnect the negative battery cable.
2. Remove fuel tank.
3. Disconnect the hoses from the EVAP canister (Fig. 5).

Fig 6 EVAP Bracket:

4. Remove 2 nuts from the upper bracket of the EVAP canister (Fig. 6).

Fig 7 EVAP Mounting Grommets:

Fig 8 EVAP Canister Bracket:

5. Remove EVAP canister from bracket (Fig. 8).

Fig 8 EVAP Canister Bracket:

6. Remove LDP from EVAP canister upper bracket (Fig. 9).

INSTALLATION
1. Install LDP to EVAP Canister.(Fig. 9).
2. Install EVAP canister to Bracket (Fig. 8).
3. Install 2 nuts to EVAP canister bracket.
4. Connect hoses.
5. Install fuel tank.
6. Connect negative battery cable.