Pre-Aiming Instructions

1. Inspect for badly rusted or faulty headlight assemblies.
2. Place vehicle on a level floor.
3. Bounce front suspension through three (3) oscillations by applying body weight to hood or bumper.
4. Inspect tire inflation.
5. Rock vehicle sideways to allow vehicle to assume its normal position.
6. If fuel is not full, place a weight in trunk of vehicle to simulate weight of a full tank [3 Kg (6.5 lbs.) per gallon.]
7. There should be no other load in the vehicle other than driver or substituted weight of approximately 70 Kg (150 lbs.) placed in driver's position. Thoroughly clean headlight lenses.