Component Service

If the SRS components are to be removed or replaced as a result of maintenance, troubleshooting, etc., follow the appropriate procedure (SRS Air Bag Control Unit, Air Bag Modules and Clock Spring).

CAUTION:
1. SRS components should not be subjected to heat over 93° C (200° F), so remove the SRS-ECU, air bag modules and clock spring before drying or baking the vehicle after painting. Recheck SRS system operability after reinstalling them.
2. If the SRS components are removed for the purpose of inspection, sheet metal repair, painting, etc., they should be stored in a clean, dry place until they are reinstalled.