Timing Cover: Service and Repair

FRONT COVER
REMOVAL
1. Remove crankshaft damper.
2. Remove generator belt idler pulley.
3. Remove front timing belt cover fasteners (Fig 57) and remove covers.

Figure 57:

4. Remove engine mount bracket (Fig. 57).

INSTALLATION

Figure 57:

1. Install the engine mount bracket and front timing belt covers.
2. Install generator belt idler pulley and tighten bolt to 54 Nm (40 ft. lbs.).
3. Install crankshaft damper.

REAR COVER
REMOVAL
1. Remove front timing belt covers.
2. Remove Timing Belt.
3. Remove timing belt idler pulley.
4. Remove both camshaft sprockets.

Figure 58:

5. Remove rear timing belt fasteners and remove cover from engine (Fig. 58).

INSTALLATION

Figure 58:

1. Install rear timing belt cover and fasteners.
2. Install timing belt idler.
3. Install camshaft sprocket and timing belt.
4. Install engine mount bracket.
5. Install front covers.