Headlamp Control Module: Service and Repair

The headlamp module contains the park and turn signal lamps and is serviced as an assembly.

REMOVAL
1. Release hood latch and open hood.

Headlamp Module Screws:

2. Remove screws attaching headlamp module to radiator closure panel and headlamp adapter.

Headlamp Module:

3. Remove headlamp module from radiator closure panel.
4. Disconnect wire connector from headlamp bulb socket.
5. Rotate park/turn signal lamp socket one quarter turn counterclockwise.
6. Pull park/turn signal socket from headlamp module.
7. Remove headlamp module from vehicle.

INSTALLATION
1. Position headlamp module to vehicle.
2. Push park/turn signal socket into headlamp module.
3. Rotate park/turn signal lamp socket one quarter turn clockwise.
4. Connect wire connector to headlamp bulb socket.
5. Position headlamp module to radiator closure panel.
6. Install screws attaching headlamp module to radiator closure panel.