Sunroof Express Module

SUNROOF EXPRESS MODULE

REMOVAL

1. Remove A-pillar trim, sun visors, and map lamps/mini console.
2. Remove sunroof opening trim lace
3. Pull headliner down as necessary to gain access to sunroof express module.

Fig. 2:

4. Disconnect the express module wire harness connectors (Fig. 2).
5. Remove express module from the keyway by sliding module towards the center of the vehicle.

INSTALLATION

1. Place express module in the keyway located in sunroof module and slide module outward to lock it into position.
2. Set headliner into position.
3. Connect drive motor, express module, and control switch wire connectors.
4. Test sunroof operation, adjust as necessary.
5. Finish installing headliner.
6. Install sunroof opening trim lace.
7. Install A-pillar trim, sun visors, and map lamps/mini console.