Headlamp: Service and Repair

The headlamp module contains the park and turn signal lamps and is serviced as an assembly.

REMOVAL
1. Release hood latch and open hood.

Headlamp Module:

2. Remove screws attaching headlamp module to radiator closure panel.
3. Remove headlamp module from radiator closure panel.
4. Disconnect wire connector from back of headlamp bulb.
5. Rotate Park lamp socket counterclockwise one quarter turn.
6. Pull socket from back of lamp.
7. Remove headlamp module from vehicle.

INSTALLATION
1. Install headlamp module into position.
2. Push socket into back of lamp.
3. Rotate Park lamp socket clockwise one quarter turn.
4. Connect wire connector to back of headlamp bulb.
5. Install headlamp module to radiator closure panel.
6. Install screws attaching headlamp module to radiator closure panel.
7. Close hood.