Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2000 >> Cirrus L4-2.4L VIN X >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Brakes and Traction Control >> System Specifications >> Brake Drum Refinishing Specifications
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Drum Refinishing Specifications








Maximum Diameter/Discard Diameter
- All brake drums are marked with the maximum allowable brake drum diameter. Refer to figure.


Maximum Lateral Runout/Thickness Variation
- The diameter variation of the drum braking surface must not exceed either 0.0635 mm (0.0026 inch) in 30° or 0.0889 mm (0.0035 inch) in 360°.
- Measure brake drum runout. Brake drum runout should be checked with the drum mounted on a brake lathe. Brake drum runout should not exceed 0.1524 mm (0.006 inch).
- If either of these measurements are not within specification, reface or replace the drum.


pro multis · About Operation CHARM