Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2000 >> Cirrus L4-2.4L VIN X >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Motor >> Service and Repair >> Wiper Motor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wiper Motor Replacement

REMOVAL
1. Remove wiper motor assembly.

Linkage Removal:




2. With motor assembly on bench, disconnect drive linkage from motor output crank. Using a ball joint/tie rod separator, separate the ball cap from the ball.
3. Remove retightening nut to motor output crank and remove crank from motor output shaft.
4. Remove motor mounting nuts and remove motor.

INSTALLATION
For installation, reverse the above procedures. Tighten the mounting screws to 10 to 12 Nm (89 to 106 in. lbs.) torque. Ensure that the motor connector seal is properly positioned. Tighten the motor mounting nuts to 25 to 30 Nm (19 to 23 ft. lbs.) torque.
pro multis · About Operation CHARM