Cruise Control Vacuum Reservoir: Service and Repair

REMOVAL
1. Disconnect the negative battery cable.
2. Remove the Powertrain Control Module (PCM) refer to the Fuel Injection System.
3. Remove and reposition coolant reservoir.
4. Remove PDC and bracket.
5. Remove vacuum reservoir.
6. Disconnect vacuum hose

INSTALLATION
1. Connect vacuum hose.
2. Install vacuum reservoir and tighten fasteners.
3. Install PDC and bracket and tighten fasteners.
4. Install coolant reservoir.
5. Install PCM refer to the Fuel Injection System.
6. Connect the negative battery cable.