Camshaft Position Sensor: Service and Repair

Camshaft Position Sensor Location:

The Camshaft Position Sensor is mounted in the front of the timing case cover.

REMOVAL
1. Disconnect electrical connector from sensor.
2. Remove Camshaft Position Sensor screw.
3. Without pulling on the connector, pull the sensor out of the chain case cover.

INSTALLATION
1. Install sensor in the chain case cover and push sensor in until contact is made with the timing chain cover. While holding the sensor in this position, install and tighten the retaining bolt to 12 N.m (105 in. lbs.) torque.
2. Attach electrical connector to sensor.