Diagnostic Procedure

Before testing the seat functions, verify that the battery is fully charged and the terminals cleaned and tightened to ensure proper connections. If the battery is not fully charged.

The following test will determine if the circuit is complete through the body harness to the switch:

Using a voltmeter, verify the condition of the power seat circuit breaker located under the driver's seat. The circuit breaker also protects the passenger side power seat track circuit. Check both sides of the circuit breaker connector for voltage, on the wire side.
- If not OK replace circuit breaker.
- If battery voltage is detected on both sides of the circuit breaker. Refer to Seat Motor in the Diagnostic and Testing.
- If seat motors test OK, refer to the Seat Switch in the Diagnostic and Testing.