Rocker Arm Assembly: Service and Repair

REMOVAL
1. Remove cylinder head cover using procedure.
2. Remove timing belt, sprockets and covers using procedure.
3. Remove camshaft.

CAUTION: If cam follower assemblies are to be reused, always mark position for reassembly in their original positions.

4. Remove cam follower assemblies from cylinder head.

INSPECTION





Fig. 63

Inspect the cam follower assembly for wear or damage (Fiat 63). Replace as necessary.

INSTALLATION





Fig. 64

1. Lubricate with clean oil and install cam follower assemblies in their original position on the hydraulic adjuster and valve stem (Fig. 64).
2. Install the camshafts.
3. Install timing belt, sprockets and covers using procedures.
4. Install cylinder head cover using procedure.