Evaporator Temperature Sensor / Switch: Service and Repair

REMOVAL
1. Remove the glove box.

Evaporator Probe Connector:

2. Disconnect the evaporator probe connector.

Evaporator Probe Grommet:

3. Using a flat blade pry tool, pry the evaporator probe grommet from the HVAC housing.

Evaporator Probe:

4. Remove evaporator probe from evaporator.

INSTALLATION
For installation, reverse the above procedures. Three holes are provided in evaporator for probe location. When reinstalling probe, use a different hole than original one. If a new evaporator is installed, insert the probe in the uppermost hole provided.