Header Reading/Courtesy Lamp Bulb Replacement

REMOVAL
1. Insert a small, flat bladed pry tool at forward position between reading/courtesy lamp lens and lamp housing.

Reading/Courtesy Lamp Lens:

2. Pry lamp lens from lamp housing.
3. Insert a small, flat bladed pry tool between lamp light shield and lamp housing at inboard rear corner of light shield.

Reading/Courtesy Lamp Light Shield:

4. Pry light shield from housing.
5. Carefully press forward lamp bulb contact toward opposite contact and rotate.
6. Remove bulb from lamp bulb contacts.

INSTALLATION
1. Carefully press forward lamp bulb contact toward opposite contact and rotate bulb into position.
2. Position bulb to lamp bulb contacts.
3. Release lamp bulb contacts.
4. Insert outer edge of light shield into lamp housing.
5. Rotate light shield upward and snap inboard edge into lamp housing.
6. Position lens switch tab to lamp switch.
7. Press lens pivots to tabs on lamp housing until both pivots are seated.