Door Stop: Service and Repair

STOP BUMPER

REMOVAL

1. Remove center stop bumper trim panel.

Fig. 2:

2. Loosen screws holding rear of stop bumper to door inner panel (Fig. 2).
3. Remove screw holding front of stop bumper to door inner panel.
4. Remove stop bumper from vehicle.

INSTALLATION

1. Place stop bumper in position on vehicle.

Fig. 2:

2. Install screw to hold front of stop bumper to door inner panel (Fig. 2).
3. Tighten screws to hold rear of stop bumper to door inner panel.
4. Install center stop trim panel.