B-Pillar Lower Trim

B-PILLAR LOWER TRIM

REMOVAL

1. Slide lower seat belt cover rearward to expose anchor bolt.
2. Remove bolt attaching lower seat belt anchor to floor.
3. Remove upper B-pillar trim cover.

Fig. 3:

4. Remove access panel. from B-pillar trim (Fig. 3)
5. Remove screw attaching lower trim cover to B-pillar from below seat belt retractor.
6. Disengage hidden clips attaching lower trim cover to B-pillar.
7. Remove lower B-pillar trim cover from vehicle.

INSTALLATION

1. Place lower B-pillar trim cover in position on vehicle.
2. Insert seat belt through hole in lower B-pillar trim.
3. Engage hidden clips attaching lower trim cover to B-pillar.
4. Install screw attaching lower trim cover to B-pillar below seat belt retractor.
5. Install access cover.
6. Install upper B-pillar trim cover.
7. Place seat belt anchor in position on floor so webbing is pointed rearward and slightly outboard.
8. Install bolt attaching lower seat belt anchor to floor. Tighten all seat belt bolts to 39 N.m (29 ft.lbs.) torque.
9. Verify that seat belt anchor does not interfere with seat track travel.