Synchronizing Cable Adjustment

SYNCHRONIZING CABLE ADJUSTMENT

NOTE:
- Bench seats equipped with child restraint seats have an interlock feature that will not allow the seat back to fold forward with the child seat open.
- If the seat back hinges do not release at the same time the synchronizing cable must be adjusted.

1. Remove seat from vehicle. Refer to Owner's Manual for proper procedures.

Fig. 6:

2. Disengage cable from the recline mechanism by pulling the cable end toward the front of the seat (Fig. 6).
3. Pull V-shaped locking tab on self-adjusting mechanism to disengage auto-adjust feature.
4. Reattach self-adjusting mechanism, pulling against spring load to tighten cable.
5. Press locking tab onto the adjusting mechanism to lock into place.