Main Relay (Computer/Fuel System): Service and Repair

Power Distribution Center:

The Automatic Shutdown relay (ASD) relay is located in the PDC. The inside top of the PDC cover has a label showing relay and fuse location.

REMOVAL
1. Remove PDC cover.
2. Remove relay from PDC.
3. Check condition of relay terminals and PDC connector terminals for damage or corrosion. Repair if necessary before installing relay.
4. Check for pin height (pin height should be the same for all terminals within the PDC connector). Repair if necessary before installing relay.

INSTALLATION
1. Install relay to PDC.
2. Install cover to PDC.