Wiper Motor Linkage: Service and Repair

Wiper Linkage Replacement



REMOVAL
1. Remove the windshield wiper unit from vehicle.
2. Place the wiper unit on a suitable work surface.
3. Remove nuts holding the cowl cover brackets to the wiper unit.
4. Remove cowl cover brackets from the wiper unit.

Wiper Linkage:

5. Remove nuts holding linkage and motor mount plate to the wiper unit.
6. Remove the wiper linkage from the wiper unit.

Wiper Motor Connector:

7. Disconnect the wire connectors from back of the wiper motor.

INSTALLATION
For installation, reverse the above procedure.